Skip to product information

HPP-19210 – Aftermarket Powerglide Tall High Gear Drum

The HPP November 2026 PG High Gear Drum Sale Discounts Applies Once the Part is Added to the Cart!!!

The HPP-19210 is an aftermarket replacement for the OEM Powerglide tall drum, the reaction face of this drum has not been machined and is designed to work with OEM pump to drum thrust washers or a pump that has been machined for a needle bearing thrust washer.   This drum can be fitted with up to a six standard thickness clutch pack (0.098” clutch disks with 0.070” steels) or up to an eight-clutch pack using thin clutches and steels (0.060” clutch disks with 0.060” steels).

The base bare drums are supplied by IDP.  The base drums have a lighting groove machined in the front face which decreases static / rotation weight of the drum; these drums weigh 0.5 lbs. less than an OEM tall Powerglide drum. The drums also have four fluid bleed ports machined in them to allow lubrication fluid to evacuate the drum when high gear is engaged. This lubrication fluid modification helps to direct oil towards the band apply surface of the drum, reducing drag between the drum and band while high gear is active.

After we receive the drums in from our supplier, we prepare the vent port for and install a Sonnax High RPM Check Ball Capsule. Once the machine work is complete, we inspect, debur, wash and head to the press to install a Teflon coated drum bushing. When we box the drums, they are ready for a builder to assemble with their internals and clutch pack setup.

If you have any questions about the HPP-19210 bare drum with bushing, feel free to contact us.

$130.00